Function:cs2srcb

From S2PLOT

(Difference between revisions)
Jump to: navigation, search
Revision as of 22:08, 7 January 2009
S2plot admin (Talk | contribs)

← Previous diff
Current revision
S2plot admin (Talk | contribs)

Line 7: Line 7:
==Description== ==Description==
-Register function that is called when remote control data comes in eg. from is2remote running on a wireless iPod touch. This function can consume the event (by returning 1) to prevent further (built-in) handling by S2PLOT.+Register function that is called when remote control data comes in. This function can consume the event (by returning 1) to prevent further (built-in) handling by S2PLOT.
==See Also== ==See Also==
<table> <table>
<tr><td>[[Function:cs2socb |cs2socb]]</td><td>Register function that will draw direct OpenGL graphics when called.</td></tr> <tr><td>[[Function:cs2socb |cs2socb]]</td><td>Register function that will draw direct OpenGL graphics when called.</td></tr>
 +<tr><td>[[Function:s2ldev |s2ldev]]</td><td>List the available S2PLOT devices on stdout.</td></tr>
<tr><td>[[Function:s2disp |s2disp]]</td><td>Draw the scene, but return control when a timeout occurs or when shift-ENTER is pressed.</td></tr> <tr><td>[[Function:s2disp |s2disp]]</td><td>Draw the scene, but return control when a timeout occurs or when shift-ENTER is pressed.</td></tr>
<tr><td>[[Function:s2show | s2show ]]</td><td>Draw the scene and enter interactive mode if interactive is non-zero. </td></tr> <tr><td>[[Function:s2show | s2show ]]</td><td>Draw the scene and enter interactive mode if interactive is non-zero. </td></tr>
Line 17: Line 18:
==Sample Code== ==Sample Code==
 +
 +Some additional steps are required to get the remote callback to function. After you have compiled the sample code, you will need to follow these steps:
 +
 +1. In the terminal/shell you are planning to run the executable in (cs2srcb), type
<code><pre> <code><pre>
 +setenv S2PLOT_REMOTEPORT 3333
</pre></code> </pre></code>
 +Note that you can use another port number instead of 3333 if required.
-[[S2PLOT:Function List | Back]] to S2PLOT function list.+2. Run the code
 +3. In another terminal/shell type the following:
 +<code><pre>
 +telnet localhost 3333
 +S2 setcolor 0.9,0.1,0.5
 +</pre></code>
 +4. The polygon/billboard should now change colour.
-__NOTOC__+5. Quitting the executable (shift-Q) should close the terminal session.
-__NOEDITSECTION__+
 +<code><pre>
 +#include <stdio.h>
 +#include <stdlib.h>
 +#include <time.h>
 +#include <string.h>
 +#include "s2plot.h"
-Back to [[Function:Template | template]] page.+unsigned int tid;
 + 
 +float _bb_r, _bb_g, _bb_b;
 + 
 +int remote_cb(char *data);
 +void cb(double *t, int *kc);
 + 
 +int main(int argc, char *argv[])
 +{
 + int width = 16, height = 16; /* Dimensions of texture */
 + int i, j; /* Loop variables */
 + int idx; /* Index into texture array */
 + unsigned char *tex; /* Array of texture values */
 + 
 + srand48((long)time(NULL)); /* Seed random numbers */
 + 
 + s2opend("/?",argc,argv); /* Open the display */
 + s2svp(-1.0,1.0, -1.0,1.0, -1.0,1.0); /* Set the viewport coords */
 + s2swin(-1.0,1.0, -1.0,1.0, -1.0,1.0); /* Set the window coordinates */
 + s2box("BCDE",0,0,"BCDE",0,0,"BCDE",0,0); /* Draw a bounding box */
 + 
 + tid = ss2ct(width, height); /* Create a new texture */
 + tex = ss2gt(tid, &width, &height); /* Get the texture */
 + 
 + for (j=0;j<height;j++) {
 + for (i=0;i<width;i++) {
 + idx = (j*width + i) * 4; /* Stored as (r,g,b,alpha) */
 + tex[idx ] = 255; /* solid red */
 + tex[idx+1] = 255; /* Green */
 + tex[idx+2] = 255; /* Blue */
 + tex[idx+3] = 127 * drand48()+128; /* Random transparency */
 + }
 + }
 + ss2pt(tid); /* Push texture for usage */
 + 
 + _bb_g = 0.7;
 + _bb_b = 0.9;
 + 
 + cs2scb(&cb); /* Install a callback */
 + cs2srcb(&remote_cb); /* Install remote callback */
 + 
 + s2show(1); /* Open the s2plot window */
 + 
 + return 1;
 +}
 + 
 +void cb(double *t, int *kc)
 +{
 + float x = 0.0, y = 0.3, z = 0.4; /* Location */
 + float isize = 0.02; /* Texture scale */
 + float str_x = 0.0, str_y = 0.0, str_z = 0.0; /* No stretch */
 + float alpha = 0.9; /* Alpha channel */
 + char trans = 't'; /* Transparency */
 + 
 + ds2bb(x,y,z, str_x,str_y,str_z, isize, _bb_r, _bb_g, _bb_b, tid, alpha, trans);
 + /* Draw the billboard */
 +}
 + 
 +int remote_cb(char *data) {
 + // this remote callback will receive strings coming in on
 + // the S2PLOT_REMOTEPORT port.
 + 
 + char *contype, *ctype, *cargs;
 + 
 + contype = strtok(data, " ");
 + 
 + // for this demo, we will only parse commands preceded by "S2"
 + if (!contype || strcmp(contype, "S2")) {
 + // return 0 to indicate we have not "consumed" this event
 + fprintf(stderr, "remote_cb: no valid command prefix\n");
 + return 0;
 + }
 + 
 + ctype = strtok(NULL, " ");
 + if (!ctype) {
 + fprintf(stderr, "remote_cb: no command present\n");
 + return 0;
 + }
 + 
 + int consumed = 0;
 + 
 + // the only command we accept is "setcolor" to set the
 + // billboard color
 + if (!strcmp(ctype, "setcolor")) {
 + cargs = strtok(NULL, " ");
 + if (!cargs) {
 + fprintf(stderr, "remote_cb: no argument for setcolor present\n");
 + return 0;
 + }
 + float vr, vg, vb;
 + sscanf(cargs, "%f,%f,%f", &vr, &vg, &vb);
 + 
 + if ((vr >= 0.) && (vr <= 1.) &&
 + (vg >= 0.) && (vg <= 1.) &&
 + (vb >= 0.) && (vb <= 1.)) {
 + _bb_r = vr;
 + _bb_g = vg;
 + _bb_b = vb;
 + }
 + 
 + 
 + consumed = 1;
 + } else {
 + fprintf(stderr, "remote_cb: unknown command %s\n", ctype);
 + }
 + 
 + return consumed;
 +}
 +</pre></code>
 + 
 +[[S2PLOT:Function List | Back]] to S2PLOT function list.
 + 
 +__NOTOC__
 +__NOEDITSECTION__

Current revision

cs2srcb

Register when remote control data is received.

Prototype

void cs2srcb(void *remcb);

Description

Register function that is called when remote control data comes in. This function can consume the event (by returning 1) to prevent further (built-in) handling by S2PLOT.

See Also

cs2socbRegister function that will draw direct OpenGL graphics when called.
s2ldevList the available S2PLOT devices on stdout.
s2dispDraw the scene, but return control when a timeout occurs or when shift-ENTER is pressed.
s2show Draw the scene and enter interactive mode if interactive is non-zero.

Sample Code

Some additional steps are required to get the remote callback to function. After you have compiled the sample code, you will need to follow these steps:

1. In the terminal/shell you are planning to run the executable in (cs2srcb), type

setenv S2PLOT_REMOTEPORT 3333

Note that you can use another port number instead of 3333 if required.

2. Run the code

3. In another terminal/shell type the following:

telnet localhost 3333
S2 setcolor 0.9,0.1,0.5

4. The polygon/billboard should now change colour.

5. Quitting the executable (shift-Q) should close the terminal session.

#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <string.h>
#include "s2plot.h"

unsigned int tid;

float _bb_r, _bb_g, _bb_b;

int remote_cb(char *data);
void cb(double *t, int *kc);

int main(int argc, char *argv[])
{
   int width = 16, height = 16;         /* Dimensions of texture */
   int i, j;                            /* Loop variables */
   int idx;                             /* Index into texture array */
   unsigned char *tex;                          /* Array of texture values */

   srand48((long)time(NULL));                   /* Seed random numbers */

   s2opend("/?",argc,argv);                     /* Open the display */
   s2svp(-1.0,1.0, -1.0,1.0, -1.0,1.0);         /* Set the viewport coords */
   s2swin(-1.0,1.0, -1.0,1.0, -1.0,1.0);        /* Set the window coordinates */
   s2box("BCDE",0,0,"BCDE",0,0,"BCDE",0,0);     /* Draw a bounding box */

   tid = ss2ct(width, height);          /* Create a new texture */
   tex = ss2gt(tid, &width, &height);   /* Get the texture */

   for (j=0;j<height;j++) {
      for (i=0;i<width;i++) {
         idx = (j*width + i) * 4;               /* Stored as (r,g,b,alpha) */
         tex[idx  ] = 255;                      /* solid red */
         tex[idx+1] = 255;                      /* Green */
         tex[idx+2] = 255;                      /* Blue */
         tex[idx+3] = 127 * drand48()+128;      /* Random transparency */
      }
   }
   ss2pt(tid);                          /* Push texture for usage */

   _bb_g = 0.7;
   _bb_b = 0.9;

   cs2scb(&cb);                         /* Install a callback */
   cs2srcb(&remote_cb);                 /* Install remote callback */

   s2show(1);                           /* Open the s2plot window */

   return 1;
}

void cb(double *t, int *kc)
{
   float x = 0.0, y = 0.3, z = 0.4;                     /* Location */
   float isize = 0.02;                                  /* Texture scale */
   float str_x = 0.0, str_y = 0.0, str_z = 0.0;         /* No stretch */
   float alpha = 0.9;                                   /* Alpha channel */
   char trans = 't';                                    /* Transparency */

   ds2bb(x,y,z, str_x,str_y,str_z, isize, _bb_r, _bb_g, _bb_b, tid, alpha, trans);
                                        /* Draw the billboard */
}

int remote_cb(char *data) {
  // this remote callback will receive strings coming in on
  // the S2PLOT_REMOTEPORT port.

  char *contype, *ctype, *cargs;

  contype = strtok(data, " ");

  // for this demo, we will only parse commands preceded by "S2"
  if (!contype || strcmp(contype, "S2")) {
    // return 0 to indicate we have not "consumed" this event
    fprintf(stderr, "remote_cb: no valid command prefix\n");
    return 0;
  }

  ctype = strtok(NULL, " ");
  if (!ctype) {
    fprintf(stderr, "remote_cb: no command present\n");
    return 0;
  }

  int consumed = 0;

  // the only command we accept is "setcolor" to set the
  // billboard color
  if (!strcmp(ctype, "setcolor")) {
    cargs = strtok(NULL, " ");
    if (!cargs) {
      fprintf(stderr, "remote_cb: no argument for setcolor present\n");
      return 0;
    }
    float vr, vg, vb;
    sscanf(cargs, "%f,%f,%f", &vr, &vg, &vb);

    if ((vr >= 0.) && (vr <= 1.) &&
        (vg >= 0.) && (vg <= 1.) &&
        (vb >= 0.) && (vb <= 1.)) {
      _bb_r = vr;
      _bb_g = vg;
      _bb_b = vb;
    }


    consumed = 1;
  } else {
    fprintf(stderr, "remote_cb: unknown command %s\n", ctype);
  }

  return consumed;
}

Back to S2PLOT function list.


Personal tools